Have Questions?
-
Genuine Parts
Guaranteed Authentic
-
Modification Specialists
Call for assistance
-
Mod Now, Pay Later
Financing Available
-
Save On Delivery
Free shipping on most orders over $199
Z Automotive Tazer - Dodge Charger 2011-2023 / Challenger 2015-2023 (+Multiple Fitments)
Lease for as low as $/week
The Tazer is an electronic OBD2 plug-in device to allow access to a wide variety of additional features for the following vehicles:
- 2015-2023 Dodge Challenger
- 2011-2023 Dodge Charger
- 2011-2023 Chrysler 300
- 2014-2023 Dodge Durango
- 2014-2022 Jeep Grand Cherokee (WKII)
Do you have a 2018 or newer vehicle?
If so, you MUST use the security bypass that’s correct for your vehicle. (See Below)
Security Gateway Bypass Module:
The Security Gateway Bypass Module is for the following vehicles:
- 2018-2023 Dodge Durango
- 2018-2022 Jeep Grand Cherokee
*This bypass is required when installing the Tazer in a vehicle on the above list.
Additionally, the Security Gateway Bypass can be used in any 2018+ FCA vehicle except for Cherokee L/WL or Grand Cherokee L/WL.
Double Bypass:
The Double-Bypass is a security gateway bypass for the following vehicles:
- 2018-2023 Dodge Charger
- 2018-2023 Dodge Challenger
- 2018-2023 Chrysler 300
This bypass is required when installing the Tazer in a vehicle on the above list.
The Double-Bypass can be used in older Chargers, Challengers and 300s to relocate the Tazer to the trunk.
Features Available:
- 2018+ Models: Due to the addition of a security module, a Double Bypass or Security Gateway Bypass Module is REQUIRED for the Tazer to function!
- Feature Enable: The Tazer can unlock SRT Drive modes, including Track, Valet, ECO (2015-18 Scat Pack), enable factory Sport Mode (5 speed and 8 speed), SRT EVIC Performance pages, and SRT performance pages* in the Uconnect 8.4 radio. Enable paddle shifters if you add the factory paddle-equipped steering wheel. Enable factory fog lights, backup camera, extra video input and more. Disable TPMS. Change DRL’s. Enable Shift Light on 2015+ (6.4L). Disable in motion navigation lockout. Disable seatbelt reminder chime. And more, see the user guide for a full list.
- Line Lock: Press 2 steering wheel buttons while stopped, and the ABS valves will hold the vehicle with the front brakes so you can hit the gas and do a perfect burnout as long as you wish, with no wear on the rear brakes. No plumbing required! This is an ideal alternative to the traditional plumbed-in solenoid type line lock/roll control. Super simple and cannot be detected! When Line Lock is in use, it temporarily disables traction control and for AWD cars, keeps the car in RWD mode.
- Light Shows: Using the key fob or steering wheel buttons and added dash menu, turn on a light show that flashes the exterior lights in 9 different patterns – there are 6 pre-configured patterns and 3 make-your-own. Perfect for car shows and parades. (can be unlocked for in-motion use, only for legal emergency use. Contact tech support for instructions)
- 3rd Brake Flash: Set rate and number of flashes to pulse the 3rd brake light when brakes are applied for increased visibility
- Force Engine Mode: This allows you to choose which engine mode to stay in. Very useful on 2015+, where you want the active exhaust to remain open with increased throttle response without the transmission being in track mode.
- Force Transmission Mode: This allows you to choose which transmission mode to stay in.
- Force Power Mode: Force key mode (Black/Red/Valet) For Hellcats, you can force red key performance while using the black key. For most 2015+, you can force valet mode.
- Startup Drive Mode: Like driving in Sport or Track mode every time you get in your car? Tazer can set the startup drive mode for you, so you don’t need to switch modes every time you get in the car.
- Auto stop-start Disable: If you have a Grand Cherokee or Durango with Auto StopStart, you may find it annoying and want it to default OFF. The Tazer can do this for you, no need to press that disable button every time you start the car.
- Steering Wheel shifting**(SWS): This allows you to use your steering wheel’s cruise+/- buttons to manually control gear shift while keeping your hands on the wheel. SWS mode is enabled after placing the vehicle in AutoStick mode using the console shifter. Once in AutoStick, use the cruise buttons to shift (only when cruise control is turned off)! This feature can be enabled or disabled at any time using the steering wheel buttons.
- Auto Upshift**: Set your own shift points when in AutoStick – Using steering wheel buttons or ZPU Utility, dial in any RPM for upshifts in AutoStick mode – perfect for high-power high-revving track use. This feature requires that “sport mode” is enabled (2012-2014 only).
- Peak RPM Display: Will display actual shift RPMs after each shift – great when adjusting Auto Upshift to squeeze every last bit out of that high revving cam, or to check what RPM you hit when shifting manually.
- 0 to 30 and 0 to 60 Timer: Will display 0 to 30 and 0 to 60 times on EVIC display. Good for the 2011’s that can’t enable SRT pages.
- Force AWD modes: On AWD models, force the AWD system to stay in RWD or AWD, instead of letting the car decide on its own. Good for racing, drifting, etc. Or set it back to “normal” whenever you wish.
- Reset Adaptives: Will reset TCM adaptives any time you wish with a simple push of the “BACK” and cruise on/off buttons.
- ESP full on/off: Press and hold the ESP button for 7 seconds to TOTALLY disable the ESP, ABS, AWD systems. Press and hold again to turn it back on.
- Remote Windows: Raise and lower front windows from the keyfob. (EXPERIMENTAL)
- Button Remapping: Use the Adaptive Cruise distance buttons (when ACC is off), or install “Aux” buttons or viper cruise button bank and map the buttons for quick access to many of Tazer’s functions.
- Video Inputs: The Tazer can enable two extra video inputs for a front camera or video player or both on the 2015-2106 RA3/4 Uconnect radio. It can add one input on the 2017+ UAQ and UAS radios. Check out our AV Cables or Video Cable. The AV Cables are needed to add video and audio feeds.
- …and more. Check out the user guide for details.
*Uconnect performance pages on 8.4″ Uconnect only (2012-2014). EVIC SRT menu and Sport Mode are available on the 4.3″ screen.
**not on 8-speed vehicles.
Accessory Options:
Aux Buttons - Style "A": The Style "A" AUX buttons are a snap-in steering wheel button set for the following vehicles:- 2015 (Build date March or later) - 2017 Dodge Challenger
- 2015 (Build date March or later) - 2017 Dodge Charger
- 2015 (Build date March or later) - 2017 Chrysler 300
- 2015 (Build date March or later) - 2017 Dodge Durango
- 2015 (Build date March or later) - 2017 Jeep Grand Cherokee
Aux Buttons B: Stealth Aux buttons for 2017.5 and up Charger, Challenger, 300, Grand Cherokee and Durango.
AV Cable Kit: Add video inputs to the RA3/RA4 and UAQ/UAS radios.
HDMI AV Kit: Adds HDMI input to 8.4" & 12" Uconnect (not all models, see description).
Video Input Cable: Add a single video input to 8.4" & 12" Uconnect (see description).
Video/Power Extension Harness: Easiest method to supply power and video signal from an aftermarket camera to the cabin.
INSTALLATION IS SIMPLE: PLUG IT INTO THE DIAGNOSTIC OBD2 PORT!
Returns may be accepted within 14 days of purchase pending Return Merchandise Authorization (RMA). No returns or cancellations on special order items. All returns will be charged a 20% restocking fee, no exceptions.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. Item must be able to be resold as new.
Several types of goods are exempt from being returned. Hazardous materials, fluids, greases, chemicals, and clothing are not able to return.
Free shipping is available within the lower 48 states for most orders totaling $199 or more. A free shipping option will be available during checkout. This offer is for delivery address in the continental United States and excludes shipments going to Alaska, Hawaii, Military Boxes, and items that require freight shipping.
Processing Time
Patterson Performance stocks a large quantity of items at any given time. Some items may require drop shipping from one of our various distributors. In stock items will ship within 1-2 business days. If you're needing your product quickly, please contact us to verify product availability before placing your order. Orders requiring additional verification (security concerns, incorrect information, etc.) may need additional processing time. Estimated shipping dates are not guaranteed and are subject to change based on inventory levels and manufacturer lead times. Backordered items are shipped immediately once available.
Items ship daily, If the item you ordered is not in stock, a member of our team will contact you via email / phone.
Patterson Performance will only ship to an address that varies from your billing address if payment is made via Paypal or a financing partner.
Patterson Performance ships from multiple warehouses throughout the United States, and sometimes from manufacturers overseas.
You can simply contact us via email / telephone for a live inventory check
Find more information at www.P65Warnings.ca.gov.
90 day manufacturer warranty.